TS27M2CDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	Out1	output	Output of op-amp channel 1. Push-pull CMOS output; can source ~60 mA (Io) and sink ~45 mA (Isink) typical; swings low to within ~50 mV of VCC-.
2	In1-	input	Inverting input of op-amp channel 1. Very high impedance CMOS gate input; typical input bias current 1 pA.
3	In1+	input	Non-inverting input of op-amp channel 1. Common-mode input range 0 V to VCC+ − 1.5 V.
4	VCC-	power_in	Negative supply / ground. Single-supply operation ties this to GND; dual-supply operation drives it negative. Total supply (VCC+ − VCC-) rated 3 V to 16 V (18 V absolute max).
5	In2+	input	Non-inverting input of op-amp channel 2. Common-mode input range 0 V to VCC+ − 1.5 V.
6	In2-	input	Inverting input of op-amp channel 2. Very high impedance CMOS gate input; typical input bias current 1 pA.
7	Out2	output	Output of op-amp channel 2. Push-pull CMOS output; swings to within ~50 mV of VCC-; ~60 mA typical short-circuit current.
8	VCC+	power_in	Positive supply pin. Supply range 3 V to 16 V (18 V absolute max). Total quiescent current typically 150 µA per amplifier (~300 µA package).

Key specifications

Parameter	Value
Manufacturer	STMicroelectronics
Package	SO-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

TS27M2CDTD
TS27M2CDT
TS27M2CDTN
TS27M2CDTP
TS27M2CDTPT

CAD (KiCad official)

Symbol: TS27M2CDT
Footprint: Package_SO:TI_SO-PowerPAD-8
3D model: SO-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: STMicroelectronics datasheet (14 pp, sha256 a32c30e933ee91a3, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF