Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TPTLV70218DBVR

TECH PUBLIC · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TPTLV70218DBVR from TECH PUBLIC, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply voltage. Operating range 1.2V to 5.5V; absolute maximum -0.3V to 6.5V referenced to GND. Bypass to GND with a 1 uF to 10 uF ceramic capacitor.
2 GND power_in Device ground / return for the regulator and internal reference.
3 EN input Active-high enable input. Drive above VENH (0.7V typ, 0.9V max) to turn the regulator on; drive below VENL (0.65V typ, 0.4V min) to shut down. Absolute max -0.3V to 6V. Do not float - tie to VIN if always-on operation is desired.
4 NC unconnected No internal connection. Leave floating or tie to GND for mechanical robustness.
5 VOUT power_out Regulated output, fixed 1.8V for the -18 option, capable of up to 300 mA (typical current limit 600 mA, min 350 mA). Requires a 1 uF to 10 uF ceramic output capacitor. Active discharge (~80 ohm) pulls VOUT to ground when EN is low.

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TPTLV70218DBVR

CAD (KiCad official)

  • Symbol: TPTLV70218DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (10 pp, sha256 50e07c3ad6af52be, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF