TPTLV6002IDGKR from TECH PUBLIC, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUTA	output	Output of amplifier A. Rail-to-rail push-pull CMOS output; typical output swing to within 6mV of VDD/VSS with RL=100kΩ. Short-circuit current ±20mA typ.
2	INA-	input	Inverting input of amplifier A. High-impedance CMOS input; input bias current 10pA typ. Input common-mode voltage range VSS-0.1V to VDD+0.1V (rail-to-rail).
3	INA+	input	Non-inverting input of amplifier A. High-impedance CMOS input; input bias current 10pA typ. Rail-to-rail common-mode input range.
4	VSS	power_in	Negative supply / ground. In single-supply operation connect to GND. Total supply (VDD-VSS) from 2.5V to 5.5V.
5	INB+	input	Non-inverting input of amplifier B. High-impedance CMOS input; input bias current 10pA typ. Rail-to-rail common-mode input range.
6	INB-	input	Inverting input of amplifier B. High-impedance CMOS input; input bias current 10pA typ. Rail-to-rail common-mode input range.
7	OUTB	output	Output of amplifier B. Rail-to-rail push-pull CMOS output; typical output swing to within 6mV of the supply rails with RL=100kΩ. Short-circuit current ±20mA typ.
8	VDD	power_in	Positive supply. 2.5V to 5.5V single-supply operation. Quiescent current 40µA typ. per amplifier (80µA total for the dual).

Key specifications

Parameter	Value
Manufacturer	TECH PUBLIC
Package	MSOP-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

TPTLV6002IDGKR

CAD (KiCad official)

Symbol: TPTLV6002IDGKR
Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
3D model: MSOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tptlv6002idgkr.step`	123 KB	You want the bare part, or you mark your own boards.
`tptlv6002idgkr-etched.step`	2.5 MB	You want the part with `TPTLV6002IDGKR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 629 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: TECH PUBLIC datasheet (6 pp, sha256 c12fea3a3ed24154, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF