component

TPTLV6002IDGKR

Public Made by Adom

by adom

TECH PUBLIC Operational Amplifier, MSOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmptptlv6002idgkr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tptlv6002idgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json tptlv6002idgkr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
README.md tptlv6002idgkr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
tptlv6002idgkr-etched.fit.json tptlv6002idgkr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
tptlv6002idgkr-etched.glb tptlv6002idgkr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
tptlv6002idgkr-etched.step tptlv6002idgkr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC b… · Ray
tptlv6002idgkr.glb Publish 0.1.0 · Ray
tptlv6002idgkr.kicad_mod Publish 0.1.0 · Ray
tptlv6002idgkr.kicad_sym Publish 0.1.0 · Ray
tptlv6002idgkr.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
tptlv6002idgkr.step Publish 0.1.0 · Ray

TPTLV6002IDGKR

TECH PUBLIC · Operational Amplifier · MSOP-8

TPTLV6002IDGKR from TECH PUBLIC, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output of amplifier A. Rail-to-rail push-pull CMOS output; typical output swing to within 6mV of VDD/VSS with RL=100kΩ. Short-circuit current ±20mA typ.
2 INA- input Inverting input of amplifier A. High-impedance CMOS input; input bias current 10pA typ. Input common-mode voltage range VSS-0.1V to VDD+0.1V (rail-to-rail).
3 INA+ input Non-inverting input of amplifier A. High-impedance CMOS input; input bias current 10pA typ. Rail-to-rail common-mode input range.
4 VSS power_in Negative supply / ground. In single-supply operation connect to GND. Total supply (VDD-VSS) from 2.5V to 5.5V.
5 INB+ input Non-inverting input of amplifier B. High-impedance CMOS input; input bias current 10pA typ. Rail-to-rail common-mode input range.
6 INB- input Inverting input of amplifier B. High-impedance CMOS input; input bias current 10pA typ. Rail-to-rail common-mode input range.
7 OUTB output Output of amplifier B. Rail-to-rail push-pull CMOS output; typical output swing to within 6mV of the supply rails with RL=100kΩ. Short-circuit current ±20mA typ.
8 VDD power_in Positive supply. 2.5V to 5.5V single-supply operation. Quiescent current 40µA typ. per amplifier (80µA total for the dual).

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • TPTLV6002IDGKR

CAD (KiCad official)

  • Symbol: TPTLV6002IDGKR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: tptlv6002idgkr-etched.step / tptlv6002idgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tptlv6002idgkr.step / tptlv6002idgkr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tptlv6002idgkr.step 123 KB You want the bare part, or you mark your own boards.
tptlv6002idgkr-etched.step 2.5 MB You want the part with TPTLV6002IDGKR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 629 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (6 pp, sha256 c12fea3a3ed24154, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF