component
TPS7A7001DDAR
Public Unreviewedby Ray
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTPS7A7001DDAR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8-EP
TPS7A7001DDAR from Texas Instruments, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected. Recommended to connect NC pins to large-area planes for improved thermal performance. |
| 2 | EN | input | Enable input. Pulling this pin below 0.5 V turns the regulator off (VIL_EN max 0.5 V, VIH_EN min 1.1 V). Connect to VIN if not being used. EN pin input current is 0.2 uA max at VEN = 0 V. |
| 3 | IN | power_in | Unregulated supply voltage pin (1.425 V to 6.5 V). It is recommended to connect an input capacitor (CIN) to this pin for stable operation. |
| 4 | NC | unconnected | Not internally connected. Recommended to connect NC pins to large-area planes for improved thermal performance. |
| 5 | NC | unconnected | Not internally connected. Recommended to connect NC pins to large-area planes for improved thermal performance. |
| 6 | OUT | power_out | Regulated output pin (adjustable from 0.5 V, up to 2 A). A 4.7-uF or larger output capacitor (COUT) of any type is required for stability. Dropout is 380 mV max at IOUT = 2 A. |
| 7 | FB | input | Output-voltage feedback input from the external divider (R1/R2). Internal reference VREF = 0.500 V (0.490 V to 0.510 V). Use 10 kOhm <= R1, R2 <= 50 kOhm. FB pin bias current is 1 uA max. |
| 8 | GND | power_in | Device ground return. GND pin current is typically <3 mA under load and 5 uA max in shutdown. |
| 9 | PowerPAD | passive | Exposed thermal pad on the underside of the SOIC-8 package. Strongly recommended to connect to a large-area ground plane; may alternatively be connected to an electrically floating dedicated thermal plane. Junction-to-case (bottom) thermal resistance is 6.8 degC/W. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8-EP |
| Category | PMIC |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
TPS7A7001DDAR
CAD (KiCad official)
- Symbol:
TPS7A7001DDAR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
d65f218b7030737a, retrieved 2026-08-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).