component
tps62160dgkr
Public Unreviewedby Ray
Texas Instruments DC-DC Converters, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62160DGKR
Texas Instruments · DC-DC Converters · MSOP-8
TPS62160DGKR from Texas Instruments, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground. Return path for the internal low-side power MOSFET; connect directly to the input and output capacitor grounds with a low-impedance plane. |
| 2 | VIN | power_in | Supply voltage input, 3 V to 17 V (absolute max 20 V). Bypass with a low-ESR ceramic capacitor (typ. 10 µF) placed close to the pin. |
| 3 | EN | input | Enable input. High = converter enabled, Low = converter shut down (shutdown current < 2 µA). Referenced to AGND; do not leave floating. |
| 4 | AGND | power_in | Analog ground. Reference for the internal control circuitry and feedback network; tie to PGND at a single point under the device. |
| 5 | FB | input | Voltage feedback for the adjustable version. Connect a resistive divider from VOUT to FB to AGND to set VOUT (VFB nominal 0.8 V). On fixed-output variants tie FB to AGND for improved thermal performance. |
| 6 | VOS | input | Output voltage sense pin and connection for the DCS-Control loop circuitry. Connect directly to the output capacitor / point of regulation with a short, dedicated trace. |
| 7 | SW | output | Switch node, connected to the internal high-side and low-side power MOSFETs. Connect the external inductor (typ. 2.2 µH) between SW and the output capacitor. Keep this node area small to minimize EMI. |
| 8 | PG | output | Power-good output, open-drain. High (via external pull-up) when VOUT is within regulation; Low when VOUT is below the nominal threshold. Goes high-impedance when the device is disabled. Max sink current 10 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
TPS62160DGKRTPS62160DGKRDGKTTPS62160DGKRDSGRTPS62160DGKRDSGT
CAD (KiCad official)
- Symbol:
TPS62160DGKR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
6c26eb5b607f7af5, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.