component
TPS62060DSGR
Public Unreviewedby Ray
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTPS62060DSGR
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TPS62060DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground supply pin for the output stage. Connect to system ground and to the PowerPAD. |
| 2 | SW | output | Switch node connected to the internal high-side and low-side MOSFETs. Connect the external inductor (typ. 1 uH) between this pin and the output capacitor. |
| 3 | AGND | power_in | Analog ground supply pin for the internal control circuit. Tie to system ground. |
| 4 | FB | input | Feedback pin for the internal regulation loop (Vref = 600 mV). Connect an external resistor divider from VOUT here to set the output voltage; for fixed-output variants, tie directly to VOUT. |
| 5 | EN | input | Enable input. Drive high (VIH >= 1 V) to enable the converter, low (VIL <= 0.4 V) to enter shutdown. Must be terminated (do not float). |
| 6 | MODE | input | Mode select input. High forces fixed-frequency PWM operation; Low enables power-save mode with automatic PFM/PWM transition. Must be terminated. |
| 7 | AVIN | power_in | Analog VIN supply pin for the internal control circuit (2.7 V to 6 V). Must be connected to PVIN and to the input capacitor. |
| 8 | PVIN | power_in | Power-stage VIN supply pin (2.7 V to 6 V). Bypass to PGND with a low-ESR ceramic input capacitor (typ. 10 uF). |
| 9 | PowerPAD | power_in | Exposed thermal pad on the package bottom. Must be soldered to the PCB ground land pattern for thermal performance; used as device GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | PMIC |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
TPS62060DSGRTPS62060DSGRDSGT
CAD (KiCad official)
- Symbol:
TPS62060DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
d1c813991ae3ff3a, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).