component

TPS61170DRVR

Public Unreviewed

by Ray

Texas Instruments DC-DC Converters, WSON-6(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmictps61170drvr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TPS61170DRVR

Texas Instruments · DC-DC Converters · WSON-6(2x2)

TPS61170DRVR from Texas Instruments, in a WSON-6(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Voltage feedback input. Connect to the center tap of an external resistor divider from VOUT to program the output voltage; reference is typically 1.229 V. Input bias current is up to 200 nA.
2 COMP output Output of the internal transconductance error amplifier. Connect an external RC network to this pin for loop compensation. Source/sink current is typically 100 uA; transconductance is 320 umho typ.
3 GND power_in Device ground. Return for internal circuitry and power switch source. Also tie the exposed thermal pad to this analog ground plane.
4 SW power_out Switching node; drain of the internal 40 V, 1.2 A N-channel MOSFET (RDS(on) ~0.3 ohm at VIN=3.6 V). Connect to the switched side of the boost inductor. Absolute max voltage is 40 V.
5 CTRL input Multi-function control input used to enable the device and to program the feedback voltage. Accepts a PWM signal (duty cycle scales VREF) or an EasyScale 1-wire digital protocol for on-the-fly output voltage reprogramming. Logic high >=1.2 V, logic low <=0.4 V; internal pull-down ~800 kOhm.
6 VIN power_in Input supply for the IC. Connect to a 3 V to 18 V rail with a local input capacitor (>=1 uF). Absolute max is 20 V; UVLO threshold ~2.2 V (VIN falling).
PAD Thermal Pad passive Exposed thermal pad on the bottom of the QFN. Solder to the analog ground plane with thermal vias for optimal power dissipation.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6(2x2)
Category PMIC
Pins 7

Ordering variants

Same part, different packaging or reel option.

  • TPS61170DRVR
  • TPS61170DRVRDRVT

CAD (KiCad official)

  • Symbol: TPS61170DRVR
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6(2x2) (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tps61170drvr.step 78 KB You want the bare part, or you mark your own boards.
tps61170drvr-etched.step 1.9 MB You want the part with TPS61170DRVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 489 faces against 50 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 f94f8926c7a90603, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF