Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TPS564201DDCR

Texas Instruments · DC-DC Converters · TSOT-23-6

TPS564201DDCR from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin. Source terminal of low-side power NFET as well as the ground terminal for controller circuit. Connect sensitive VFB to this GND at a single point.
2 SW output Switch node connection between high-side NFET and low-side NFET. Connects to the output inductor. Rated -1.8 V to 17 V (recommended operating).
3 VIN power_in Input voltage supply pin. The drain terminal of the high-side power NFET. Operating range 4.5 V to 17 V.
4 VFB input Converter feedback input. Connect to output voltage with a feedback resistor divider. Typical VFB threshold 760 mV.
5 EN input Enable input control. Active high; must be pulled up to enable the device. VIH ≥ 1.6 V, VIL ≤ 0.8 V. Internal pull-down R_EN ≈ 425 kΩ to GND.
6 VBST power_out Bootstrap supply input for the high-side NFET gate drive circuit. Connect a 0.1 µF capacitor between VBST and SW pins.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • TPS564201DDCR
  • TPS564201DDCRDDCT

CAD (KiCad official)

  • Symbol: TPS564201DDCR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 5bcc3358c45448a4, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF