component
TPS25200DRVR
Public Unreviewedby Ray
Texas Instruments Supervisor and Reset ICs, WSON-6-EP(2x2). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTPS25200DRVR
Texas Instruments · Supervisor and Reset ICs · WSON-6-EP(2x2)
TPS25200DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Protected power switch output (VOUT). Internally clamped to 5.4 V (typ) during overvoltage events. Rated for 2.5 A continuous output current. |
| 2 | ILIM | output | Current-limit set pin. External resistor RILIM to GND programs the current-limit threshold (recommended 33 kΩ ≤ RILIM ≤ 1100 kΩ, giving ~2.95 A down to ~83 mA). Continuous source current limited to 150 µA. |
| 3 | FAULT | output | Active-low open-drain fault output. Asserted during overcurrent, overvoltage, or overtemperature. Requires an external pull-up resistor to the logic I/O voltage; sink current rated 25 mA (abs max), 10 mA continuous. |
| 4 | EN | input | Logic-level enable input. Driven high enables the power switch (turn-on threshold 1.9 V max rising); driven low turns off (0.6 V min falling). Cannot be left floating and must be limited to VIN when tied high. Operating range 0 to 6.5 V. |
| 5 | GND | power_in | Ground connection. Must be connected externally to the PowerPAD for proper thermal performance. |
| 6 | IN | power_in | Input voltage supply (2.5 V to 6.5 V recommended, 20 V abs max). Place a 0.1 µF or larger ceramic capacitor from IN to GND as close to the IC as possible. |
| PAD | PowerPAD | passive | Exposed thermal PowerPAD internally connected to GND. Must be soldered to the board and connected externally to the GND terminal to heat-sink the part. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | PMIC |
| Pins | 7 |
Ordering variants
Same part, different packaging or reel option.
TPS25200DRVRTPS25200DRVRDRVT
CAD (KiCad official)
- Symbol:
TPS25200DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
edd540ec636ef00c, retrieved 2026-08-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).