Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TPS2051CDBVR

Texas Instruments · AC-DC Controllers and Regulators · SOT-23-5

TPS2051CDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Power-switch output; connect to load. Sourced from IN through the internal high-side MOSFET when EN is asserted. Rated 0.5A continuous for TPS2051C.
2 GND power_in Device ground reference. All voltages are referenced to this pin.
3 FLT output Active-low open-drain fault output, asserted during overcurrent or overtemperature conditions. Requires an external pull-up resistor (typ. 10kΩ) to a logic supply. Sink current 0-5mA.
4 EN input Active-high enable input; logic high turns on the power switch. VIH ≥ 2V, VIL ≤ 0.7V; 0-5.5V input range. TPS2051C is the active-high variant (EN, not EN̄).
5 IN power_in Input voltage and power-switch drain (4.5-5.5V). Connect a 0.1µF or greater ceramic bypass capacitor from IN to GND close to the IC.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TPS2051CDBVR
  • TPS2051CDBVRDBVT
  • TPS2051CDBVRDGKR
  • TPS2051CDBVRDGKT
  • TPS2051CDBVRDGNR
  • TPS2051CDBVRDGNT

CAD (KiCad official)

  • Symbol: TPS2051CDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (51 pp, sha256 898c093489ac30dd, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF