Loads on click. Unloads when scrolled away or the tab is hidden.
Contents

README

markdown

TPAX809TS3

TECH PUBLIC · Supervisor and Reset ICs · SOT-23

TPAX809TS3 from TECH PUBLIC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference pin (接地脚). All voltages are referenced to this pin.
2 RESET output Push-pull reset signal output. Driven low when VDD falls below the reset threshold (VRST = 3.08 V for TS3). Returns high at least 140 ms after VDD rises back above the threshold. Output drive: VOL ≤ 0.3 V at 3.2 mA sink (VDD=3V); VOH ≥ VDD-0.4 V at 1.2 mA source (VDD=3V). Max output current 20 mA.
3 VDD power_in Chip supply voltage and monitored input (芯片供电电源及待检测电压输入脚). Operating range 1.0 V to 5.5 V; typical IDD 10 µA at 3.0 V. Max VDD input current 20 mA; max slew rate 100 V/s.

Key specifications

Parameter Value
Manufacturer TECH PUBLIC
Package SOT-23
Category PMIC
Pins 3

Ordering variants

  • TPAX809TS3

CAD (KiCad official)

  • Symbol: TPAX809TS3
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TECH PUBLIC datasheet (None pp, sha256 79fe5a07ef1c330f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF