Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TP8005

TPOWER · LED Drivers · SOT-89-5L

TP8005 from TPOWER, in a SOT-89-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Internal power MOSFET drain. Switching node connecting to the inductor and Schottky freewheel diode; rated -0.3V to +40V relative to GND with 0.35Ω typical Rds(on) and 1.2A continuous current capability.
2 GND power_in Chip ground reference. Also tied internally to the exposed thermal pad.
3 DIM input Chip enable, analog dimming, and PWM dimming input. Internal 200KΩ pull-up to a 5V regulator; VDIM<0.3V shuts the chip down, VDIM>2.5V gives full LED current, analog dimming range 0.5V-2.5V, PWM up to 50kHz. Abs-max -0.3V to +6V.
4 CS input High-side output current sense input. Sense resistor RCS is connected between VIN and CS; average sense voltage VIN-VCS is typically 98mV (A grade) or 102mV (B/C grade) with ±15% hysteretic ripple. Abs-max ±1.0V relative to VIN.
5 VIN power_in Power supply input, 5V-36V operating (abs-max 40V). Bypass capacitor must be placed close to this pin to GND. UVLO rising ~4.2V, falling ~4.0V; typical operating current 150µA.
EP Exposed PAD power_in Thermal exposed pad on the bottom of the SOT89-5L package, electrically connected to chip ground. Solder to a GND copper pour to improve heat dissipation. Not present on the SOT23-5L variant.

Key specifications

Parameter Value
Manufacturer TPOWER
Package SOT-89-5L
Category LED-drv
Pins 6

CAD (KiCad official)

  • Symbol: TP8005
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5L (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TPOWER datasheet (9 pp, sha256 d8fd54d3dc9edf0b, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF