component
tp5552-vr
Public Unreviewedby Ray
3PEAK Precision OpAmps, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTP5552-VR
3PEAK · Precision OpAmps · MSOP-8
TP5552-VR from 3PEAK, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of amplifier A. Rail-to-rail output; swings to within ~5mV of each supply rail with RL=10kΩ. Short-circuit current ±60mA, drives up to 1000pF capacitive load. |
| 2 | -INA | input | Inverting input of amplifier A. Common-mode range extends from (V-)−0.1V to (V+)+0.1V. Internal ESD diodes to each supply rail; limit input current to <10mA if input exceeds a rail by >500mV. |
| 3 | +INA | input | Non-inverting input of amplifier A. Rail-to-rail common-mode range (V-)−0.1V to (V+)+0.1V. Input bias current typ. ±50pA, offset current typ. ±100pA. Internal ESD diodes to each supply rail. |
| 4 | -Vs | power_in | Negative power supply. Typically tied to ground for single-supply operation, or to a negative rail for split-supply as long as V+ − V- is between 1.8V and 5.5V. Bypass with 0.1μF as close to the pin as possible if not connected to ground. |
| 5 | +INB | input | Non-inverting input of amplifier B. Rail-to-rail common-mode range (V-)−0.1V to (V+)+0.1V. Input bias current typ. ±50pA. Internal ESD diodes to each supply rail. |
| 6 | -INB | input | Inverting input of amplifier B. Common-mode range extends from (V-)−0.1V to (V+)+0.1V. Internal ESD diodes to each supply rail; limit input current to <10mA if input exceeds a rail by >500mV. |
| 7 | OUTB | output | Output of amplifier B. Rail-to-rail output; swings to within ~5mV of each supply rail with RL=10kΩ. Short-circuit current ±60mA, drives up to 1000pF capacitive load. |
| 8 | +Vs | power_in | Positive power supply. 1.8V to 5.5V single-supply, or the positive rail of a split supply (±0.9V to ±2.75V) such that V+ − V- stays within 1.8V-5.5V. Bypass with a 0.1μF ceramic capacitor placed as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
TP5552-VRTP5552-VRSR
CAD (KiCad official)
- Symbol:
TP5552-VR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (None pp, sha256
a5b8948df6e2494b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.