component
TLV7031DBVR
Public Unreviewedby Ray
Texas Instruments Comparators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV7031DBVR
Texas Instruments · Comparators · SOT-23-5
TLV7031DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator push-pull output stage with absolute maximum rating from VEE - 0.3V to VCC + 0.3V. |
| 2 | V- | power_in | Negative (lowest) supply or ground for single-supply operation, absolute minimum -0.3V. |
| 3 | IN+ | input | Non-inverting input with recommended voltage range from VEE - 0.1V to VCC + 0.1V. |
| 4 | IN- | input | Inverting input with recommended voltage range from VEE - 0.1V to VCC + 0.1V. |
| 5 | V+ | power_in | Positive supply voltage with recommended operating range from 1.6V to 6.5V (supply voltage VS = V+ minus V-). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TLV7031DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (69 pp, sha256
03c6901d3923c547, retrieved 2026-09-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).