component
TLV62566DBVR
Public Unreviewedby Ray
Texas Instruments DC-DC Converters, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownTLV62566DBVR
Texas Instruments · DC-DC Converters · SOT-23-5
TLV62566DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG | output | Power Good open-drain output. High-impedance when the output voltage is within regulation; pulled low if the output is below its nominal value, or when VIN is below UVLO, or when thermal shutdown triggers. Requires an external pull-up resistor. |
| 2 | GND | power_in | Ground pin. Network ground reference for all voltages. |
| 3 | SW | power_out | Switch node connected to the internal high-side and low-side MOSFET switches and to the inductor terminal. Connect the output filter inductor (typ. 2.2 µH) to this pin. |
| 4 | VIN | power_in | Power supply voltage input, 2.7 V to 5.5 V. Requires a local input decoupling capacitor (typ. 4.7 µF) to GND. |
| 5 | FB | input | Feedback input for the internal control loop. Connect to the center tap of the external resistor divider from VOUT to GND to set the output voltage (VFB nominal 0.6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
TLV62566DBVRTLV62566DBVRDBVT
CAD (KiCad official)
- Symbol:
TLV62566DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
acec9293334c09b5, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).