TLC27M2ID from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1OUT	output	Amplifier 1 output. Push-pull CMOS output; swings to the negative rail (GND). Short-circuit protected via internal current limiting.
2	1IN-	input	Amplifier 1 inverting input. High-impedance CMOS gate input (~10^12 Ω), bias current typically in the pA range.
3	1IN+	input	Amplifier 1 non-inverting input. High-impedance CMOS gate input; common-mode range extends below the negative rail (GND) for I-suffix parts.
4	GND	power_in	Negative supply / ground reference. For single-supply operation this is 0 V; for split-supply operation this is VSS/VEE. Also serves as the output negative rail.
5	2IN+	input	Amplifier 2 non-inverting input. High-impedance CMOS gate input; common-mode range extends below the negative rail (GND) for I-suffix parts.
6	2IN-	input	Amplifier 2 inverting input. High-impedance CMOS gate input (~10^12 Ω), bias current typically in the pA range.
7	2OUT	output	Amplifier 2 output. Push-pull CMOS output; swings to the negative rail (GND). Short-circuit protected via internal current limiting.
8	VCC	power_in	Positive supply (also referred to as VDD). Absolute range 3 V to 16 V (I-suffix: 4 V to 16 V over full -40°C to 85°C). Decouple locally with 100 nF ceramic to GND.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-8
Category	Amplifiers/Comparators
Pins	8

Ordering variants

Same part, different packaging or reel option.

TLC27M2ID
TLC27M2IDR
TLC27M2IP
TLC27M2IPW
TLC27M2MJG
TLC27M2MFK

CAD (KiCad official)

Symbol: TLC27M2ID
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (None pp, sha256 08aa75b4bab143d7, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF