TL082IDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT1	output	Output of op-amp 1. Push-pull bipolar output stage with internal short-circuit protection (short to ground or either supply survives indefinitely, subject to power dissipation limits).
2	IN1-	input	Inverting input of op-amp 1. High-impedance JFET gate input; input voltage must not exceed the supply voltage magnitude or 15 V, whichever is less.
3	IN1+	input	Non-inverting input of op-amp 1. High-impedance JFET gate input; common-mode range extends up to Vcc+.
4	VCC-	power_in	Negative supply rail. Typically -Vs in a split-supply configuration or GND in single-supply operation. Total supply (Vcc+ to Vcc-) range 6 to 36 V (absolute max +/-18 V).
5	IN2+	input	Non-inverting input of op-amp 2. High-impedance JFET gate input; common-mode range extends up to Vcc+.
6	IN2-	input	Inverting input of op-amp 2. High-impedance JFET gate input; differential input voltage abs-max +/-30 V.
7	OUT2	output	Output of op-amp 2. Push-pull bipolar output stage with internal short-circuit protection.
8	VCC+	power_in	Positive supply rail. Typically +Vs in a split-supply configuration. Total supply (Vcc+ to Vcc-) range 6 to 36 V (absolute max +/-18 V). Bypass to VCC- with a local ceramic capacitor.

Key specifications

Parameter	Value
Manufacturer	STMicroelectronics
Package	SO-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

TL082IDT
TL082IDTCD
TL082IDTCDT
TL082IDTACDT
TL082IDTBCDT
TL082IDTIYDT
TL082IDTAIYDT
TL082IDTBIYDT
TL082IDTIPT
TL082IDTCPT

CAD (KiCad official)

Symbol: TL082IDT
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SO-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tl082idt.step`	122 KB	You want the bare part, or you mark your own boards.
`tl082idt-etched.step`	1.6 MB	You want the part with `TL082IDT` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 412 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: STMicroelectronics datasheet (18 pp, sha256 040a260063ff97f8, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF