TL082CDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1OUT	output	Output of amplifier 1. Push-pull output with short-circuit protection; typical peak output swing ±13.5 V into RL ≥ 10 kΩ at VCC = ±15 V.
2	1IN-	input	Inverting (negative) input of amplifier 1. High-impedance JFET input (rᵢ ≈ 10¹² Ω); input bias current ~30 pA typical.
3	1IN+	input	Non-inverting (positive) input of amplifier 1. High-impedance JFET input; common-mode input voltage range typically -12 V to +15 V at VCC = ±15 V.
4	VCC-	power_in	Negative supply rail. Recommended operating range -5 V to -15 V; absolute maximum -18 V. Shared by both amplifiers.
5	2IN+	input	Non-inverting (positive) input of amplifier 2. High-impedance JFET input; common-mode input voltage range typically -12 V to +15 V at VCC = ±15 V.
6	2IN-	input	Inverting (negative) input of amplifier 2. High-impedance JFET input (rᵢ ≈ 10¹² Ω); input bias current ~30 pA typical.
7	2OUT	output	Output of amplifier 2. Push-pull output with short-circuit protection; typical peak output swing ±13.5 V into RL ≥ 10 kΩ at VCC = ±15 V.
8	VCC+	power_in	Positive supply rail. Recommended operating range +5 V to +15 V; absolute maximum +18 V. Shared by both amplifiers.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-8
Category	Op-amp/Cmp
Pins	8

Ordering variants

Same part, different packaging or reel option.

TL082CDRD
TL082CDR
TL082CDRP
TL082CDRJG
TL082CDRPS
TL082CDRPW
TL082CDRPWR
TL082CDRFK

CAD (KiCad official)

Symbol: TL082CDR
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`tl082cdr.step`	122 KB	You want the bare part, or you mark your own boards.
`tl082cdr-etched.step`	1.9 MB	You want the part with `TL082CDR` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 455 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (50 pp, sha256 692a814e502d6ffb, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF