component
TL082BCDT
Public Unreviewedby Ray
STMicroelectronics Operational Amplifier, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTL082BCDT
STMicroelectronics · Operational Amplifier · SO-8
TL082BCDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of op-amp channel 1. Push-pull output stage with internal short-circuit protection; slew rate 16 V/µs typical. |
| 2 | IN1- | input | Inverting input of op-amp channel 1. High-impedance JFET input; input voltage must not exceed ±15 V or Vcc magnitude, whichever is less. |
| 3 | IN1+ | input | Non-inverting input of op-amp channel 1. High-impedance JFET input; common-mode range extends up to Vcc+. |
| 4 | VCC- | power_in | Negative supply rail (or ground in single-supply operation). Total supply (Vcc+ − Vcc-) must be within 6 V to 36 V; absolute max ±18 V referenced to midpoint. |
| 5 | IN2+ | input | Non-inverting input of op-amp channel 2. High-impedance JFET input; common-mode range extends up to Vcc+. |
| 6 | IN2- | input | Inverting input of op-amp channel 2. High-impedance JFET input; input voltage must not exceed ±15 V or Vcc magnitude, whichever is less. |
| 7 | OUT2 | output | Output of op-amp channel 2. Push-pull output stage with internal short-circuit protection; slew rate 16 V/µs typical. |
| 8 | VCC+ | power_in | Positive supply rail. Total supply (Vcc+ − Vcc-) must be within 6 V to 36 V; absolute max ±18 V referenced to the supply midpoint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TL082BCDTDTL082BCDTTL082BCDTPT
CAD (KiCad official)
- Symbol:
TL082BCDT - Footprint:
Package_SO:TI_SO-PowerPAD-8 - 3D model: SO-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
040a260063ff97f8, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).