component

TL062IDT

Public Unreviewed

by Ray

STMicroelectronics FET InputAmplifiers, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmptl062idt
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TL062IDT

STMicroelectronics · FET InputAmplifiers · SO-8

TL062IDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of op-amp channel 1. Push-pull output with short-circuit protection; can source/sink current into a load (e.g. RL = 10 kΩ) with typical output voltage swing of ±13.5 V on ±15 V supplies.
2 IN1- input Inverting input of op-amp channel 1. High-impedance JFET input (~10^12 Ω) with low input bias current (typ. 30 pA at 25 °C).
3 IN1+ input Non-inverting input of op-amp channel 1. High-impedance JFET input; common-mode input range typ. +15/-12 V on ±15 V supplies.
4 VCC- power_in Negative supply rail (V-). Connect to ground for single-supply operation or to the negative rail for split-supply. Supply range 6 to 36 V total (±3 V to ±18 V split).
5 IN2+ input Non-inverting input of op-amp channel 2. High-impedance JFET input; common-mode input range typ. +15/-12 V on ±15 V supplies.
6 IN2- input Inverting input of op-amp channel 2. High-impedance JFET input (~10^12 Ω) with low input bias current (typ. 30 pA at 25 °C).
7 OUT2 output Output of op-amp channel 2. Push-pull output with short-circuit protection; typical output voltage swing ±13.5 V on ±15 V supplies into RL = 10 kΩ.
8 VCC+ power_in Positive supply rail (V+). Absolute maximum ±18 V referenced to midpoint; operating supply range 6 to 36 V total. Bypass with a 100 nF ceramic capacitor to VCC-.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • TL062IDT
  • TL062IDTD
  • TL062IDTN

CAD (KiCad official)

  • Symbol: TL062IDT
  • Footprint: Package_SO:TI_SO-PowerPAD-8
  • 3D model: SO-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (15 pp, sha256 afda5dad3d7fab18, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF