component
STM1061N29WX6F
Public Unreviewedby Ray
STMicroelectronics Supervisor and Reset ICs, SOT-23-3. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM1061N29WX6F
STMicroelectronics · Supervisor and Reset ICs · SOT-23-3
STM1061N29WX6F from STMicroelectronics, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Active-low, open-drain reset/detect output. Sinks current (pulls low) when VCC falls below VTH-; remains asserted until VCC rises above VTH+ (VTH- + VHYST). Requires an external pull-up (10 kΩ typical) to a supply up to 6V. Guaranteed valid down to VCC = 0.7V. |
| 2 | VSS | power_in | Ground reference for the supply. Must be connected to system ground. |
| 3 | VCC | power_in | Supply voltage and monitored input for the voltage detector. Operating range 0.7 to 6.0V (absolute max 6.5V). A 0.1 µF bypass capacitor mounted close to this pin is recommended for transient immunity. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-3 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
STM1061N29WX6FSTM1061N29WX6FW
CAD (KiCad official)
- Symbol:
STM1061N29WX6F - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (23 pp, sha256
eaa76c94a81da9fd, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).