Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

SGM8632XMS

SGMICRO · Operational Amplifier · MSOP-8

SGM8632XMS from SGMICRO, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output of amplifier A. Rail-to-rail output; drives up to ~58mA typical into load. Output swings within ~7mV of rails with 10kΩ load.
2 -INA input Inverting input of amplifier A. CMOS gate input; input bias current typ. 1pA. Input common-mode range extends 0.1V below -Vs to +Vs+0.1V.
3 +INA input Non-inverting input of amplifier A. CMOS gate input; input bias current typ. 1pA. Rail-to-rail input common-mode range.
4 -Vs power_in Negative supply rail (or GND in single-supply operation). Total supply +Vs to -Vs must be within 2V to 5.5V.
5 +INB input Non-inverting input of amplifier B. CMOS gate input; input bias current typ. 1pA. Rail-to-rail input common-mode range.
6 -INB input Inverting input of amplifier B. CMOS gate input; input bias current typ. 1pA. Input common-mode range extends 0.1V below -Vs to +Vs+0.1V.
7 OUTB output Output of amplifier B. Rail-to-rail output; drives up to ~58mA typical into load. Output swings within ~7mV of rails with 10kΩ load.
8 +Vs power_in Positive supply rail. Operating supply voltage range 2V to 5.5V (total +Vs to -Vs). Absolute max +Vs to -Vs = 6V.

Key specifications

Parameter Value
Manufacturer SGMICRO
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • SGM8632XMS/TR
  • SGM8632XMS
  • SGM8632XMSXS/TR
  • SGM8632XMSXS

CAD (KiCad official)

  • Symbol: SGM8632XMS
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SGMICRO datasheet (18 pp, sha256 564a73983011cddb, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF