component
RS324XP
Public Unreviewedby Ray
Jiangsu RUNIC Tech Operational Amplifier, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownRS324XP
Jiangsu RUNIC Tech · Operational Amplifier · SOIC-14
RS324XP from Jiangsu RUNIC Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of channel A op-amp. Output is diode-clamped to the supply rails; output short-circuit current is typically ±54mA and should be current-limited to ±100mA. |
| 2 | -INA | input | Inverting input of channel A op-amp. Rail-to-rail input, diode-clamped to supply rails; input current should be limited to ±10mA. |
| 3 | +INA | input | Noninverting input of channel A op-amp. Common-mode range -0.1V to 5.6V with Vs=5.5V; input bias current typically ±1pA. |
| 4 | V+ | power_in | Positive (highest) power supply. Operating range 2.2V to 5.5V referenced to V-; quiescent current 60uA per amplifier (240uA typical total for the quad). |
| 5 | +INB | input | Noninverting input of channel B op-amp. Rail-to-rail common-mode input range. |
| 6 | -INB | input | Inverting input of channel B op-amp. Diode-clamped to supply rails. |
| 7 | OUTB | output | Output of channel B op-amp. Rail-to-rail output; typical swing to within 8mV of the rails with a 10kΩ load. |
| 8 | OUTC | output | Output of channel C op-amp. Rail-to-rail output; short-circuit protected. |
| 9 | -INC | input | Inverting input of channel C op-amp. |
| 10 | +INC | input | Noninverting input of channel C op-amp. |
| 11 | V- | power_in | Negative (lowest) power supply. Tie to GND for single-supply operation, or to a negative rail for dual-supply operation (±1.1V to ±2.75V). |
| 12 | +IND | input | Noninverting input of channel D op-amp. |
| 13 | -IND | input | Inverting input of channel D op-amp. |
| 14 | OUTD | output | Output of channel D op-amp. Rail-to-rail output; short-circuit protected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOIC-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
RS324XPRS324XPXQ
CAD (KiCad official)
- Symbol:
RS324XP - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (25 pp, sha256
142a2f6526d0f1f6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).