Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

RH6030

RONGHE Microelectronics · Touch Sensors · SOT-23-6L

RH6030 from RONGHE Microelectronics, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output CMOS output driven by the touch detection. Polarity is configured by OLH: active-high by default, active-low when OLH=1. In sync mode it tracks the touch; in hold mode it toggles per touch.
2 GND power_in Negative supply / ground reference. All voltages are referenced to GND.
3 TCH input Touch sense input. Connects to the touch electrode, typically through a series resistor Rs (~1k) for noise immunity, with an optional 0-50pF Cj capacitor to ground for sensitivity trimming.
4 OLH input Output polarity select. Internal pull-down (default =0) sets OUT to active-high; tie to VDD (=1) for active-low output.
5 VDD power_in Positive supply. Operating range 2.0V to 5.5V (absolute max -0.3 to 5.5V). Requires a decoupling capacitor to GND; power must be stable to avoid sensitivity drift.
6 HLD input Hold/sync mode select. Internal pull-down (default =0) selects sync mode (OUT follows touch presence); tie to VDD (=1) for hold mode (OUT toggles on each touch and latches).

Key specifications

Parameter Value
Manufacturer RONGHE Microelectronics
Package SOT-23-6L
Category Sensor
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • RH6030SOT23_6
  • RH6030SOT23_6_BW

CAD (KiCad official)

  • Symbol: RH6030
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6L (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RONGHE Microelectronics datasheet (9 pp, sha256 4fdaa18c5cb87ad8, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF