PIC10F322T-I from Microchip, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	RA0/ICSPDAT/AN0/PWM1/IOC0/CWG1A/CLC1IN0	bidirectional	Port A bit 0. General-purpose digital I/O with weak pull-up and interrupt-on-change. Muxed with ICSP data (ICSPDAT), analog input AN0, PWM1 output, CWG1A output, and CLC1 input 0.
2	VSS	power_in	Ground reference for logic and I/O pins. Connect to system ground.
3	RA1/ICSPCLK/AN1/PWM2/IOC1/CWG1B/NCO1CLK/CLC1/CLKIN	bidirectional	Port A bit 1. General-purpose digital I/O with weak pull-up and interrupt-on-change. Muxed with ICSP clock (ICSPCLK), analog input AN1, PWM2 output, CWG1B output, NCO1 clock input, CLC1 output, and external clock input CLKIN.
4	RA2/AN2/T0CKI/INT/IOC2/CWG1FLT/NCO1/CLC1IN1/CLKR	bidirectional	Port A bit 2. General-purpose digital I/O with weak pull-up and interrupt-on-change. Muxed with analog input AN2, Timer0 clock (T0CKI), external interrupt (INT), CWG1 fault input, NCO1 output, CLC1 input 1, and clock reference output (CLKR).
5	VDD	power_in	Positive supply voltage. Operating range 2.3-5.5 V for PIC10F322, 1.8-3.6 V for PIC10LF322. Decouple with a 100 nF ceramic capacitor to VSS close to the pin.
6	RA3/MCLR/VPP	input	Port A bit 3, input-only. Serves as master clear reset (active low, MCLR) when configured, or as the high-voltage programming supply (VPP) during ICSP. Includes interrupt-on-change and a weak pull-up. No output driver.

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOT-23-6
Category	MCU
Pins	6

Ordering variants

Same part, different packaging or reel option.

PIC10F322T-IOT
PIC10F322T-IP
PIC10F322T-IMC

CAD (KiCad official)

Symbol: PIC10F322T-I
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`pic10f322t-i.step`	97 KB	You want the bare part, or you mark your own boards.
`pic10f322t-i-etched.step`	2.0 MB	You want the part with `PIC10F322T-I` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 505 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (193 pp, sha256 7d8ff2c6acbac809, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF