PIC10F200T-I from Microchip, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	GP0/ICSPDAT	bidirectional	Bidirectional I/O pin (GP0) with software-selectable internal weak pull-up and wake-on-change. Multiplexed with ICSPDAT, the In-Circuit Serial Programming data pin (Schmitt-Trigger input, CMOS output during ICSP).
2	VSS	power_in	Ground reference for logic and I/O pins. Connect to system ground (0 V).
3	GP1/ICSPCLK	bidirectional	Bidirectional I/O pin (GP1) with software-selectable internal weak pull-up and wake-on-change. Multiplexed with ICSPCLK, the In-Circuit Serial Programming clock pin (Schmitt-Trigger input).
4	GP2/T0CKI/FOSC4	bidirectional	Bidirectional I/O pin (GP2). Alternate functions: T0CKI (Schmitt-Trigger clock input to the Timer0 module) and FOSC4 (Fosc/4 oscillator output, CMOS).
5	VDD	power_in	Positive supply for logic and I/O pins. Operating range 2.0 V to 5.5 V. Typical operating current <175 µA at 2 V, 4 MHz; standby current ~100 nA at 2 V.
6	GP3/MCLR/VPP	input	Input-only pin (GP3) with software-selectable internal weak pull-up and wake-on-change. Multiplexed with MCLR (active-low Master Clear/Reset, Schmitt-Trigger input) and VPP (high-voltage programming input). Voltage on this pin must not exceed VDD during normal operation or the device will enter Programming mode.

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOT-23-6
Category	MCU
Pins	6

Ordering variants

Same part, different packaging or reel option.

PIC10F200T-II/OT
PIC10F200T-I/OT
PIC10F200T-II/P
PIC10F200T-II/MC

CAD (KiCad official)

Symbol: PIC10F200T-I
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`pic10f200t-i.step`	97 KB	You want the bare part, or you mark your own boards.
`pic10f200t-i-etched.step`	2.0 MB	You want the part with `PIC10F200T-I` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 509 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (98 pp, sha256 fd8ad30782af199e, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF