component
NE5534DR
Public Unreviewedby Ray
Texas Instruments Operational Amplifier, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownNE5534DR
Texas Instruments · Operational Amplifier · SOIC-8
NE5534DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BALANCE | input | External offset-nulling / frequency-compensation pin. Connect a trim network (typically a potentiometer between BALANCE and COMP/BAL with wiper to VCC-) to null the input offset voltage. |
| 2 | IN- | input | Inverting input of the op-amp. Input voltage must remain between VCC- and VCC+; differential input voltage above ~0.6 V causes excessive input current unless externally limited. |
| 3 | IN+ | input | Non-inverting input of the op-amp. Common-mode input voltage range is ±12 V (typ ±13 V) with ±15 V supplies. |
| 4 | VCC- | power_in | Negative supply rail. Recommended operating range -5 V to -15 V; absolute maximum -22 V. All voltages are referenced to the midpoint between VCC+ and VCC-. |
| 5 | COMP | output | External frequency-compensation node. Connect a compensation capacitor (typ 22 pF) between COMP and COMP/BAL for stable operation at closed-loop gains below three; may be left open for gains ≥3. |
| 6 | OUT | output | Op-amp output. Delivers ±13 V peak-to-peak swing into a 600 Ω load at ±15 V supplies (typ 26 V PP; 32 V PP at ±18 V). Short-circuit protected with ~38 mA typical output-short-circuit current. |
| 7 | VCC+ | power_in | Positive supply rail. Recommended operating range +5 V to +15 V; absolute maximum +22 V. Total supply current is typically 4 mA (max 8 mA). |
| 8 | COMP/BAL | input | Combined external offset-voltage adjustment and external frequency-compensation node. Compensation capacitor is tied between this pin and COMP (pin 5); offset-nulling potentiometer is connected between this pin and BALANCE (pin 1) with wiper to VCC-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
NE5534DRDNE5534DRNE5534DRPNE5534DRPS
CAD (KiCad official)
- Symbol:
NE5534DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
8df0a04b9b16637a, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).