component
NCV8114BSN330T1G
Public Unreviewedby Ray
onsemi Linear Voltage Regulators (LDO), TSOP-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownNCV8114BSN330T1G
onsemi · Linear Voltage Regulators (LDO) · TSOP-5
NCV8114BSN330T1G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin. Operating input voltage range 1.7 V to 5.5 V (absolute max −0.3 V to 6 V). A small ceramic capacitor (≥1 µF X5R/X7R recommended) should be placed close to this pin to ground to assure stability. |
| 2 | GND | power_in | Power supply ground reference for the regulator. Should be tied to the shortest path to the ground plane; exposed/heat-spreader area on this pin improves thermal performance. |
| 3 | EN | input | Enable input. Driving EN above 0.9 V (VEN_HI) turns the regulator on; driving EN below 0.4 V (VEN_LO) places the device in shutdown mode. Has an internal pull-down current source (~300 nA typ) that keeps the device off if EN is floating. If EN is not used, tie directly to IN. Absolute max −0.3 V to VIN + 0.3 V or 6 V. |
| 4 | N/C | unconnected | Not connected internally. May be tied to ground to improve thermal dissipation (thermal-only tie, no electrical function). |
| 5 | OUT | power_out | Regulated output voltage pin. For NCV8114BSN330T1G this pin regulates to 3.3 V nominal, up to 300 mA (typ current limit 600 mA). Requires a ≥1 µF ceramic (X5R/X7R) output capacitor from this pin to ground for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
NCV8114BSN330T1GBSN120T1GNCV8114BSN330T1GBSN150T1GNCV8114BSN330T1GBSN180T1GNCV8114BSN330T1GBSN280T1GNCV8114BSN300T1GNCV8114BSN330T1GNCV8114BSN330T1GASN120T1GNCV8114BSN330T1GASN150T1GNCV8114BSN330T1GASN165T1GNCV8114BSN330T1GASN180T1GNCV8114BSN330T1GASN250T1GNCV8114BSN330T1GASN280T1GNCV8114BSN330T1GASN300T1GNCV8114BSN330T1GASN330T1G
CAD (KiCad official)
- Symbol:
NCV8114BSN330T1G - Footprint:
Package_SO:TSOP-5_1.65x3.05mm_P0.95mm - 3D model: TSOP-5 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (13 pp, sha256
f23c2c365bfad19b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).