component

NCP114AMX300TCG

Public Made by Adom

by adom

onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, UDFN-4-EP(1x1). Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicncp114amx300tcg
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

NCP114AMX300TCG

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · UDFN-4-EP(1x1)

NCP114AMX300TCG from onsemi, in a UDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated 3.0 V output pin (300 mA max). A ceramic capacitor of at least 1 uF must be connected from this pin to GND to assure loop stability.
2 GND power_in Power supply ground reference for the regulator.
3 EN input Enable input. Driving EN above 0.9 V turns the regulator on; driving EN below 0.4 V forces shutdown mode (I_DIS ~ 0.01 uA). Input current is ~0.3 uA at V_EN = 5.5 V. In the 'A' version, pulling EN low also engages the active output discharge (R_DIS ~ 100 ohm).
4 IN power_in Unregulated input supply (1.7 V to 5.5 V operating, 6 V absolute max). A small ceramic capacitor (1 uF typ) from IN to GND is required for stability.

Key specifications

Parameter Value
Manufacturer onsemi
Package UDFN-4-EP(1x1)
Category PMIC
Pins 4

Ordering variants

Same part, different packaging or reel option.

  • NCP114AMX300TCG
  • NCP114AMX300TCGSN

CAD (KiCad official)

  • Symbol: NCP114AMX300TCG
  • Footprint: Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm
  • 3D model: UDFN-4-EP(1x1) (KiCad packages3D, STEP)
  • 3D model files: ncp114amx300tcg-etched.step / ncp114amx300tcg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp114amx300tcg.step / ncp114amx300tcg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (19 pp, sha256 e90de31adb197d95, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF