component
MX6875D33
Public Unreviewedby Ray
Wuxi Maxinmicro Surge Protection Devices (SPDs), DFN-10(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMX6875D33
Wuxi Maxinmicro · Surge Protection Devices (SPDs) · DFN-10(3x3)
MX6875D33 from Wuxi Maxinmicro, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply voltage, operating range 3.3V to 14.4V |
| 2 | VIN | power_in | Input supply voltage, operating range 3.3V to 14.4V |
| 3 | VIN | power_in | Input supply voltage, operating range 3.3V to 14.4V |
| 4 | VCP | input | Overvoltage clamp threshold selection; pull high for 5.9V clamping or low/float for 13.6V clamping threshold |
| 5 | ILMT | input | Resistor to ground sets overload and short circuit current limit, programmable from 0.4A to 5.2A |
| 6 | dVdT | input | Capacitor to ground controls output voltage ramp rate at device turn-on, typical 1ms to 10ms for 0-12V |
| 7 | EN | input | Enable input; high state (>1.4V) enables internal MOSFET, low state (<1.35V) disables device |
| 8 | OUT | tri_state | Output pin; supplies load current with programmable limit up to 5A and integrated overvoltage protection |
| 9 | OUT | tri_state | Output pin; supplies load current with programmable limit up to 5A and integrated overvoltage protection |
| 10 | OUT | tri_state | Output pin; supplies load current with programmable limit up to 5A and integrated overvoltage protection |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi Maxinmicro |
| Package | DFN-10(3x3) |
| Category | Circuit Protection |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
MX6875D33 - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi Maxinmicro datasheet (12 pp, sha256
deec0c7f37057264, retrieved 2026-09-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).