Contents

README

markdown

MX25L3206EM2I-12G

MXIC Macronix · NOR FLASH · SOP-8-200mil

MX25L3206EM2I-12G from MXIC Macronix, in a SOP-8-200mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Active-low chip select. Drives the device into active mode on a falling edge and returns it to standby (SO High-Z) when held high. Must transition at byte boundaries for write-type commands.
2 SO/SIO1 bidirectional Serial data output in standard 1x SPI mode; becomes bidirectional SIO1 during Dual Output Read (DREAD, opcode 3Bh). Data shifted out on falling SCLK edge in 1x mode.
3 WP# input Active-low hardware write protect. When SRWD=1 in the status register and WP# is low, the Status Register is protected against WRSR, enabling hardware BP-bit lockdown.
4 GND power_in Ground reference (0V) for all device supplies and signals.
5 SI/SIO0 bidirectional Serial data input in standard 1x SPI mode; becomes bidirectional SIO0 during Dual Output Read. Data is latched on the rising edge of SCLK in 1x mode.
6 SCLK input Serial clock input. Supports SPI Mode 0 (CPOL=0) and Mode 3 (CPOL=1) up to 86MHz (80MHz in Dual Output mode).
7 HOLD# input Active-low hold. When asserted low with CS# low, pauses serial communication without deselecting the device (SO becomes High-Z, SI/SCLK ignored). Tie to VCC through a pull-up if unused.
8 VCC power_in Single power supply, 2.7V to 3.6V (nominal 3.3V) for read, erase, and program operations. Decouple with a local ceramic capacitor to GND.

Key specifications

Parameter Value
Manufacturer MXIC Macronix
Package SOP-8-200mil
Category Memory
Pins 8

Ordering variants

  • MX25L3206EM2I-12G
  • MX25L3206EM2I-12GMI-12G
  • MX25L3206EM2I-12GPI-12G
  • MX25L3206EM2I-12GZNI-12G
  • MX25L3206EM2I-12GZUI-12G
  • MX25L3206EM2I-12GXCI-12G

CAD (KiCad official)

  • Symbol: MX25L3206EM2I-12G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8-200mil (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC Macronix datasheet (None pp, sha256 c04b3af428370b92, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗