MT6701CT-AKD from Magn Tek, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD	power_in	Supply pin. 3.3 V to 5.0 V nominal (absolute max 7 V). VDD must be >4.5 V during EEPROM programming. Decouple with 0.1 µF to GND; a 6 V TVS is recommended for reliability.
2	MODE	input	Digital input selecting between ABZ output mode and I2C/SSI serial interface mode. Has an internal 200 kΩ pull-up resistor, so it defaults high when left floating.
3	OUT	output	Muxed analog/digital output pin. Provides either a ratiometric analog angle voltage (0-VDD, 12-bit DAC, Rout ≈ 15-30 Ω) or a PWM-encoded angle signal (~994.4 / 497.2 Hz, programmable).
4	GND	power_in	Ground reference (VSS) for the device.
5	PUSH	output	Digital push-button detection output. Asserts when the sensor detects a change in axial distance (Z-axis) between the magnet and the die, enabling contact-less push-knob applications.
6	A/U/SDA/DO	bidirectional	Multi-function digital I/O. In ABZ mode: incremental channel A. In UVW mode: commutation phase U. In I2C mode: SDA data line. In SSI mode: DO serial data output.
7	B/V/SCL/CLK	bidirectional	Multi-function digital I/O. In ABZ mode: incremental channel B. In UVW mode: commutation phase V. In I2C mode: SCL clock line. In SSI mode: CLK serial clock input.
8	Z/W/CSN	bidirectional	Multi-function digital I/O. In ABZ mode: zero index Z. In UVW mode: commutation phase W. In SSI mode: CSN chip-select (active low). Has an internal 200 kΩ pull-up resistor.

Key specifications

Parameter	Value
Manufacturer	Magn Tek
Package	SOP-8
Category	Sensor
Pins	8

Ordering variants

Same part, different packaging or reel option.

MT6701CT-AKDCT-STD
MT6701CT-AKD
MT6701CT-AKE
MT6701CT-ACD
MT6701CT-A200
MT6701CT-A360
MT6701CT-A400
MT6701CT-A600
MT6701CT-A800
MT6701CT-AKDCT-STV
MT6701CT-AKDQT-STD
MT6701CT-AKDQT-ACD

CAD (KiCad official)

Symbol: MT6701CT-AKD
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Magn Tek datasheet (37 pp, sha256 68763bead56e55a3, retrieved 2026-08-17, tier: lcsc)
Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF