component

MIC2176-2YMM

Public Unreviewed

by Ray

Microchip Tech DC-DC Converters, MSOP-10. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpower management (pmic)mic2176-2ymm
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

MIC2176-2YMM

Microchip Tech · DC-DC Converters · MSOP-10

MIC2176-2YMM from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HSD input High-Side MOSFET Drain Connection (Input). Input of the adaptive on-time control circuitry. Operating range 4.5V to 75V (abs max -0.3V to +76V). Requires a 0.1uF ceramic capacitor between HSD and PGND placed close to the IC.
2 EN input Enable (Input). CMOS-compatible logic-level enable; logic high or floating = enable, logic low = shutdown. In off state VDD supply current drops to ~0.7mA. Logic high >=1.2V, logic low <=0.4V (4.5V<VDD<5.5V). Do not connect EN to HSD.
3 FB input Feedback (Input) to the transconductance amplifier of the control loop. Regulated to 0.8V reference (±1% at 0-85°C, ±1.5% over full temp). A resistor divider from VOUT sets the output voltage. FB bias current typ 5nA (max 500nA).
4 GND power_in Signal ground. Ground return for the VDD bias supply and internal control circuitry. Should be routed separately from PGND (power ground) and joined at a single point.
5 VDD power_in VDD Bias input for the internal reference and control sections. Operating range 4.5V to 5.5V. Requires a 1uF ceramic bypass capacitor from VDD to PGND placed next to the IC. Quiescent current ~1.4mA (max 3mA).
6 DL output Low-Side Gate Drive (Output). High-current gate driver for the external low-side N-channel MOSFET. Output swings from GND to VDD. On-resistance typ 1.2Ω (low) / 1.8Ω (high), driver sourcing/sinking 10mA.
7 PGND power_in Power Ground. Ground return path for the buck converter power stage; connects to the sources of the low-side external N-channel MOSFETs, negative terminals of input capacitors, and negative terminals of output capacitors. Route separately from signal GND with a low-impedance loop.
8 DH output High-Side Gate Drive (Output). High-current gate driver for the external high-side N-channel MOSFET, referenced to the SW node (floating). Swings between SW and BST. A small series resistor between DH and the MOSFET gate can slow turn-on/turn-off. On-resistance typ 2.1Ω (high) / 1.8Ω (low).
9 SW input Switch Node and Current-Sense input. High-current output driver return that connects directly to the switch node (drain of low-side MOSFET / source of high-side MOSFET). Also senses inductor current across the low-side MOSFET RDS(on) during OFF time - use a Kelvin connection to the low-side MOSFET drain for accurate sensing.
10 BST power_in Bootstrap (Output). Bootstrapped supply for the high-side N-channel MOSFET gate driver. Connect a Schottky diode from VDD to BST and a 0.1uF boost capacitor from BST to SW. A small series resistor at BST can slow high-side MOSFET turn-on. Abs max -0.3V to (VSW+6V), -0.3V to +82V vs PGND.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Power Management (PMIC)
Pins 10

Ordering variants

Same part, different packaging or reel option.

  • MIC2176-2YMM1YMM
  • MIC2176-2YMM
  • MIC2176-2YMM3YMM

CAD (KiCad official)

  • Symbol: MIC2176-2YMM
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (31 pp, sha256 303da73146c17fee, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF