component

MCP6232T-E

Public Unreviewed

by Ray

Microchip Operational Amplifier, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmpmcp6232t-e
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

MCP6232T-E

Microchip · Operational Amplifier · SOIC-8

MCP6232T-E from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of Op Amp A. Low-impedance voltage source; output swings from VSS + 35 mV to VDD - 35 mV with a 10 kOhm load to VDD/2.
2 VINA- input Inverting analog input of Op Amp A. High-impedance CMOS input with typical bias current of +/-1 pA at +25 C.
3 VINA+ input Non-inverting analog input of Op Amp A. High-impedance CMOS input; common-mode range VSS - 0.3 V to VDD + 0.3 V.
4 VSS power_in Negative power supply (ground in single-supply use). Must be 1.8 V to 6.0 V below VDD.
5 VINB+ input Non-inverting analog input of Op Amp B. High-impedance CMOS input; common-mode range VSS - 0.3 V to VDD + 0.3 V.
6 VINB- input Inverting analog input of Op Amp B. High-impedance CMOS input with typical bias current of +/-1 pA at +25 C.
7 VOUTB output Analog output of Op Amp B. Low-impedance voltage source; output swings from VSS + 35 mV to VDD - 35 mV with a 10 kOhm load to VDD/2.
8 VDD power_in Positive power supply, 1.8 V to 6.0 V (referenced to VSS). Requires a local 0.01 uF to 0.1 uF bypass capacitor within 2 mm and a bulk 1 uF capacitor within 100 mm.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MCP6232T-E/MS
  • MCP6232T-E/SN
  • MCP6232-E/P
  • MCP6232-I/P
  • MCP6232T-E/MNY

CAD (KiCad official)

  • Symbol: MCP6232T-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6232t-e.step 122 KB You want the bare part, or you mark your own boards.
mcp6232t-e-etched.step 2.0 MB You want the part with MCP6232T-E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 497 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (52 pp, sha256 dd66ca9f54b81dc2, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF