MCP2562FDT-E from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	TXD	input	Transmit Data Input from the CAN controller. Drives the differential CANH/CANL output pins: low = Dominant, high = Recessive. Internally pulled up (nominal 33 kΩ) to VIO.
2	VSS	power_in	Ground supply pin (0 V reference).
3	VDD	power_in	Positive supply voltage (nominal 5 V). Supplies transmitter and receiver, including the wake-up receiver. Typical UVLO threshold ~4 V.
4	RXD	output	Receive Data Output to the CAN controller. CMOS-compatible push-pull output; high when the CAN bus is Recessive, low when Dominant. Powered from VIO on the MCP2562FD.
5	VIO	power_in	Digital I/O supply pin (1.8 V-5.5 V) that sets the logic level for TXD, RXD, and STBY, allowing direct interface to low-voltage CAN controllers/MCUs. Typical undervoltage threshold ~1.2 V. Present only on the MCP2562FD.
6	CANL	bidirectional	CAN bus low-level differential I/O. Driven low during Dominant state; disconnected (high-Z) when the device is unpowered. Protected against ±14 kV ESD (IEC 61000-4-2) and bus short-circuit faults.
7	CANH	bidirectional	CAN bus high-level differential I/O. Driven high during Dominant state; disconnected (high-Z) when the device is unpowered. Protected against ±14 kV ESD (IEC 61000-4-2) and bus short-circuit faults.
8	STBY	input	Standby mode select input. Low = Normal mode (transmitter and high-speed receiver active); high = Standby mode (transmitter off, low-power wake-up receiver active). Internal MOS pull-up to VIO (typ. 660 kΩ at 5 V, 1.1 MΩ at 3.3 V, 4.4 MΩ at 1.8 V).

Key specifications

Parameter	Value
Manufacturer	Microchip
Package	SOIC-8
Category	Interface
Pins	8

Ordering variants

Same part, different packaging or reel option.

MCP2562FDT-E/SN
MCP2562FDT-EE/P
MCP2562FDT-EE/MF

CAD (KiCad official)

Symbol: MCP2562FDT-E
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip datasheet (32 pp, sha256 a3cdc31f6edc4722, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF