component
MCP2003B-H
Public Unreviewedby Ray
Microchip Tech LIN Transceivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMCP2003B-H
Microchip Tech · LIN Transceivers · SOIC-8
MCP2003B-H from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXD | tri_state | Open-drain receive data output following LIN bus state except in Power-Down mode; must be pulled high externally (>2.5V typical while LBUS recessive in Operation mode). |
| 2 | CS | input | Chip select input with internal pull-down resistor; high level activates transmitter with 10 µs typical low-pass filter; HV tolerant. |
| 3 | WAKE | input | Wake-up input with internal 800 kΩ pull-up to VBB; falling edge transitions device from Power-Down to Ready mode; HV tolerant. |
| 4 | TXD | input | Transmit data input with internal pull-up; low drives LBUS dominant, high drives recessive; internally forced high when transmitter disabled; timeout at approximately 25 ms continuous low; HV tolerant. |
| 5 | VSS | power_in | Ground reference pin. |
| 6 | LBUS | bidirectional | Bidirectional LIN bus pin with current-limited open collector driver (40-200 mA at 0.2 VBB) and internal receiver; internal pull-up resistor 20-60 kΩ in Operation mode; recessive threshold 0.6 VBB to VBB, dominant threshold -8 V to 0.4 VBB. |
| 7 | VBB | power_in | Battery positive supply voltage input; operating range 5.5 V to 30.0 V continuous; quiescent current 65-150 µA typical. |
| 8 | VREN | tri_state | Open-drain voltage regulator enable output pulled high to VBB in all modes except Power-Down; output current 5-40 mA at VBB - 0.5 V to VBB - 2.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MCP2003B-H - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
d89c165048b73ca3, retrieved 2026-09-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).