MCP1416T-E from JSMSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	NC	unconnected	No connect. Leave floating or tie to GND; not internally bonded.
2	VDD	power_in	Positive supply input. Recommended operating range 4.5V to 20V (absolute max 25V). Decouple with a low-ESR ceramic capacitor close to the pin; supply current IQ is typically <500 uA.
3	IN	input	Logic input to the gate driver. TTL/CMOS compatible with VIH >= 2.5V and VIL <= 0.8V; accepts 3.3V or 5V logic. Non-inverting: OUT follows IN.
4	GND	power_in	Device ground and return for the output driver. All voltages are referenced to this pin (COM).
5	OUT	output	Gate driver output, non-inverting relative to IN. Peak sink/source current 2A; typical rise/fall time <30ns into 1000pF. VOH/VOL drop <= 0.35V.

Key specifications

Parameter	Value
Manufacturer	JSMSEMI
Package	SOT-23-5
Category	PMIC
Pins	5

Ordering variants

Same part, different packaging or reel option.

MCP1416T-E/OT
MCP1416T-E/OT (MCP1416R)
MCP1415, MCP1415R

CAD (KiCad official)

Symbol: MCP1416T-E
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`mcp1416t-e.step`	85 KB	You want the bare part, or you mark your own boards.
`mcp1416t-e-etched.step`	1.5 MB	You want the part with `MCP1416T-E` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 382 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: JSMSEMI datasheet (9 pp, sha256 2e3618486b7f9d85, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF