component
MC33202DMR2G
Public Unreviewedby Ray
onsemi Operational Amplifier, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
Contents
README
markdownMC33202DMR2G
onsemi · Operational Amplifier · MSOP-8
MC33202DMR2G from onsemi, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1. Rail-to-rail output swings within ~50 mV of VCC/VEE with a 10 kΩ load and within ~150 mV with 600 Ω. Short-circuit current ISC ≈ 80 mA (typ). |
| 2 | IN1- | input | Inverting input of amplifier 1. Common-mode range extends from VEE to VCC (rail-to-rail input). Input bias current |
| 3 | IN1+ | input | Non-inverting input of amplifier 1. Common-mode range extends from VEE to VCC. Input voltage must not exceed either supply rail by more than 500 mV. |
| 4 | VEE | power_in | Negative supply / ground. Total supply voltage VCC-VEE up to +13 V (absolute max). Typically tied to ground in single-supply operation. |
| 5 | IN2+ | input | Non-inverting input of amplifier 2. Common-mode range extends from VEE to VCC (rail-to-rail input). |
| 6 | IN2- | input | Inverting input of amplifier 2. Input bias current |
| 7 | OUT2 | output | Output of amplifier 2. Rail-to-rail output stage capable of driving 600 Ω loads. Slew rate ≈ 1.0 V/µs (typ). |
| 8 | VCC | power_in | Positive supply. Single-supply operation from +1.8 V to +12 V (or split supplies from ±0.9 V to ±6 V). Supply current ID ≈ 0.9 mA per amplifier (typ). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | MSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MC33202DMR2GMC33202DMR2GD
CAD (KiCad official)
- Symbol:
MC33202DMR2G - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
mc33202dmr2g.step |
123 KB | You want the bare part, or you mark your own boards. |
mc33202dmr2g-etched.step |
2.8 MB | You want the part with MC33202DMR2G already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 669 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (17 pp, sha256
7e6a55da9bcd2352, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).