component

mc33201dr2g

Public Unreviewed

by Ray

onsemi Operational Amplifier, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmpmc33201dr2g
Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Contents

README

markdown

MC33201DR2G

onsemi · Operational Amplifier · SOIC-8

MC33201DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection. Leave floating or tie to a convenient net; not internally bonded.
2 IN- input Inverting input of the op-amp. Common-mode range extends rail-to-rail (VEE to VCC). Do not exceed either supply rail by more than 500 mV; differential input voltage is internally clamped by back-to-back diodes, so use series current-limit resistors for large differential drive.
3 IN+ input Non-inverting input of the op-amp. Rail-to-rail common-mode range (VEE to VCC); typical input bias current 80 nA. Differential input resistance ≈ 200 kΩ, differential input capacitance ≈ 8 pF.
4 VEE power_in Negative supply rail (or ground in single-supply operation). Total supply (VCC - VEE) must not exceed +13 V absolute max; guaranteed operation from 1.8 V up to 12 V total supply.
5 NC unconnected No connection. Not internally bonded; may be left floating.
6 OUT output Op-amp output. Rail-to-rail swing within 50 mV of each supply (RL = 10 kΩ); short-circuit current typically 80 mA (source/sink). Capable of driving 600 Ω loads; open-loop output impedance ≈ 100 Ω at 2 MHz, AV = 10.
7 VCC power_in Positive supply rail. Operating range from +1.8 V (to ground) up to +12 V (to ground); absolute maximum VCC-VEE = +13 V. Typical supply current per amplifier = 0.9 mA (max 1.125 mA).
8 NC unconnected No connection. Not internally bonded; may be left floating.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • MC33201DR2GDG
  • MC33201DR2G
  • MC33201DR2GVDG
  • MC33201DR2GVDR2G
  • MC33201DR2GPG

CAD (KiCad official)

  • Symbol: MC33201DR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (None pp, sha256 511a3f1f88efb0fe, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF