M95080-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	S	input	Chip Select (active-low). Driving S low selects the device and places it in Active Power mode; high deselects the device, tri-states Q, and enters Standby Power mode. A falling edge on S is required prior to the start of any instruction after power-up.
2	Q	output	Serial Data Output (MISO). Shifts data serially out of the device on the falling edge of Serial Clock (C). High-impedance when S is high or during Hold.
3	W	input	Write Protect (active-low). When low, freezes the write-protected memory area defined by BP1/BP0 in the Status Register, preventing changes to those bits or protected memory. Must be driven high or low and remain stable during all Write instructions.
4	VSS	power_in	Ground reference for all signals including VCC.
5	D	input	Serial Data Input (MOSI). Receives instructions, addresses, and write data. Values are latched on the rising edge of Serial Clock (C).
6	C	input	Serial Clock input. Provides timing for the serial interface, up to 20 MHz. Data on D is latched on the rising edge; data on Q changes on the falling edge. Supports SPI modes 0 and 3.
7	HOLD	input	Hold input (active-low). Pauses serial communications without deselecting the device. During Hold, Q is high-impedance and D and C are Don't Care. Device must first be selected (S low) to start the Hold condition.
8	VCC	power_in	Supply voltage. M95080-W: 2.5 V to 5.5 V. Must be held stable within the specified valid range during all operations.

Key specifications

Parameter	Value
Manufacturer	STMicroelectronics
Package	SOIC-8
Category	Memory
Pins	8

Ordering variants

Same part, different packaging or reel option.

M95080-WMN6TP
M95080-WMN6TPDW
M95080-WMN6TPMC

CAD (KiCad official)

Symbol: M95080-WMN6TP
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: STMicroelectronics datasheet (44 pp, sha256 ad27eb94b57233e1, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF