Contents

README

markdown

M24C02-WMN6TP

STMicroelectronics · EEPROM · SOIC-8

M24C02-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Chip Enable address input bit 0. Tied to VCC or VSS to set b1 of the 7-bit I2C device select code, allowing up to 8 devices on one bus. Read as low (0) if left floating.
2 E1 input Chip Enable address input bit 1. Tied to VCC or VSS to set b2 of the 7-bit I2C device select code. Read as low (0) if left floating.
3 E2 input Chip Enable address input bit 2. Tied to VCC or VSS to set b3 of the 7-bit I2C device select code. Read as low (0) if left floating.
4 VSS power_in Ground reference for VCC supply voltage.
5 SDA bidirectional I2C Serial Data. Open-drain input/output; requires an external pull-up resistor to VCC. May be wire-OR'ed with other open-drain devices on the bus.
6 SCL input I2C Serial Clock input. Strobes data on SDA(in) and clocks data out on SDA(out). Supports 100 kHz and 400 kHz I2C modes.
7 WC input Write Control input (active-low, shown overlined WC). When driven high, write operations to the entire memory array are inhibited (device select and address are ACKed but data bytes are not). Writes are enabled when driven low or left floating.
8 VCC power_in Supply voltage. For the -W option: 2.5 V to 5.5 V. Decouple to VSS with a 10-100 nF capacitor close to the package pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Memory
Pins 8

Ordering variants

  • M24C02-WMN6TPMN
  • M24C02-WMN6TPMN6
  • M24C02-WMN6TPMN6T
  • M24C02-WMN6TPMN6TP
  • M24C02-WMN6TPMN6TG
  • M24C02-WMN6TPDW
  • M24C02-WMN6TPDW6
  • M24C02-WMN6TPDW6T
  • M24C02-WMN6TPDW6TP
  • M24C02-WMN6TPDW6TG
  • M24C02-WMN6TPBN
  • M24C02-WMN6TPBN6
  • M24C02-WMN6TPBN6P
  • M24C02-WMN6TPMC
  • M24C02-WMN6TPMC6
  • M24C02-WMN6TPMC6T
  • M24C02-WMN6TPMC6TP
  • M24C02-WMN6TPMC6TG

CAD (KiCad official)

  • Symbol: M24C02-WMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (34 pp, sha256 3f5964536654d374, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗