component
LSP5527-S8A
Public Unreviewedby Ray
Diodes Incorporated DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownLSP5527-S8A
Diodes Incorporated · DC-DC Converters · SOP-8
LSP5527-S8A from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | passive | Bootstrap. Positive rail for the high-side switch's gate driver. Connect a 0.01 µF capacitor between BS and SW. Absolute max: Vsw − 0.3 V to Vsw + 6 V. |
| 2 | VIN | power_in | Input supply, 4.5 V to 27 V (absolute max 30 V). Bypass to GND with a low-ESR capacitor (see Input Capacitor in Application Information). |
| 3 | SW | power_out | Switch output. Connect to the switching end of the inductor. Range −0.3 V to VIN + 0.3 V; internal 95 mΩ high-side and low-side MOSFETs; delivers up to 2 A continuous. |
| 4 | GND | power_in | Ground return for the device. |
| 5 | FB | input | Feedback input. Regulated to 0.925 V (typ). Connect to the resistor divider between the output and GND to set the output voltage. Absolute max −0.3 V to 5 V. |
| 6 | COMP | output | Loop compensation pin from the internal error amplifier (gm ≈ 920 µA/V). Connect an external R-C network to GND per Stability Compensation guidance. Absolute max −0.3 V to 5 V. |
| 7 | EN | input | Enable input. VEN > 2.7 V turns the IC on; VEN < 1.1 V turns it off (output is discharged when off). Do not leave open - a 200 kΩ pull-up to VIN is recommended for start-up. Absolute max −0.3 V to 8 V. |
| 8 | SS | passive | Soft-start control. Connect a capacitor from SS to GND to program the soft-start period (0.1 µF ≈ 15 ms; internal 6 µA charging current). Leave unconnected to disable soft-start. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LSP5527-S8A
CAD (KiCad official)
- Symbol:
LSP5527-S8A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (17 pp, sha256
1f96d1d0b0ffe23c, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).