component

LP6220ASPF

Public Unreviewed

by Ray

LOWPOWER Power Management - Specialized, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpower management (pmic)lp6220aspf
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

LP6220ASPF

LOWPOWER · Power Management - Specialized · ESOP-8

LP6220ASPF from LOWPOWER, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power source input, 9V to 14V nominal (27V absolute max). Connect a ceramic bypass capacitor between VIN and GND close to the pin.
2 OUT power_out LDO regulator output voltage to the LNB. Delivers 14V (HLS=L) or 19V (HLS=H) at up to 500mA with the 22kHz DiSEqC tone superimposed. Output current limit ~650mA.
3 BOOST power_in Boost converter output voltage sense and internal LDO input terminal. Connect the boost output capacitor here; absolute max 22.5V to GND.
4 CP passive Charge pump node for the internal LDO. Connect the charge-pump flying capacitor (typ. 100nF) between CP and the boost network.
5 LX power_out Boost regulator switching node (internal NMOS drain, 1MHz, RDS(on) 150mΩ, ILIM 2.2A). Connect the boost inductor and Schottky diode here; absolute max 36V (10ns).
6 EN input Enable input. VIH=1.4V, VIL=0.4V; internal pull-high source current ~12uA. Drive high to enable the device, low to shut down (ISD ~1.6mA).
7 HLS input LNB output voltage select input. HLS=H sets VOUT=19V; HLS=L sets VOUT=14V. VIH=1.4V, VIL=0.4V; internal pull-low sink current ~4uA.
8 EXTM input External 22kHz modulation signal input for DiSEqC tone injection. Apply a 20-22kHz 50% duty square wave; produces a 700mVpp tone at VOUT with ~10us rise/fall. VIH=1.4V, VIL=0.4V; internal pull-low sink ~4uA.
EP GND power_in Exposed pad ground. Provides device ground return and thermal path; must be soldered to the PCB ground plane for heat dissipation and electrical reference.

Key specifications

Parameter Value
Manufacturer LOWPOWER
Package ESOP-8
Category Power Management (PMIC)
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • LP6220ASPF

CAD (KiCad official)

  • Symbol: LP6220ASPF
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LOWPOWER datasheet (8 pp, sha256 ff2cdb22bd27ff41, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF