component
LN61CC3502MR-G
Public Unreviewedby Ray
NATLINEAR Supervisor and Reset ICs, SOT-23. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLN61CC3502MR-G
NATLINEAR · Supervisor and Reset ICs · SOT-23
LN61CC3502MR-G from NATLINEAR, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Detector output pin, active low. For the 'C' (CMOS) variant this is a push-pull CMOS output referenced between VIN and VSS; for the 'N' variant it is an Nch open-drain output requiring an external pull-up (e.g. 100 kΩ) and rated Vss−0.3 V to 8 V. Drives low when VIN falls below the detection voltage VDF. |
| 2 | VSS | power_in | Ground / negative supply reference pin. |
| 3 | VIN | power_in | Positive supply / sensed voltage input. Operating range 0.7 V to 8.0 V; absolute maximum 8 V. This is both the device supply and the voltage being monitored against the internal VDF threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NATLINEAR |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
LN61CC3502MR-GM
CAD (KiCad official)
- Symbol:
LN61CC3502MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NATLINEAR datasheet (8 pp, sha256
a904195e6a31ddbf, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).