component

LMV358AMDTR

Public Unreviewed

by Ray

XBLW LMV358AMDTR XBLW Operational Amplifier, MSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmplmv358amdtr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

LMV358AMDTR

XBLW · Operational Amplifier · MSOP-8

LMV358AMDTR from XBLW, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output. Rail-to-rail output swing (VOH ≈ VS+ − 8mV, VOL ≈ 8mV into 10kΩ load). Short-circuit source/sink current ~40mA.
2 -INA input Inverting input of amplifier A. Input voltage range extends from (VS− − 0.1V) to (VS+ + 0.1V). Very high input impedance (100GΩ, ~1pA bias current).
3 +INA input Non-inverting input of amplifier A. Same voltage range as -INA, VS− − 0.1V to VS+ + 0.1V. Rail-to-rail input capable.
4 -VS power_in Negative power supply. Normally tied to ground; may be tied to a lower voltage as long as VS+ − VS− is between 2.3V and 5.5V. Bypass with 0.1µF close to the part if not grounded.
5 +INB input Non-inverting input of amplifier B. Rail-to-rail input, VS− − 0.1V to VS+ + 0.1V.
6 -INB input Inverting input of amplifier B. Rail-to-rail input, VS− − 0.1V to VS+ + 0.1V, ~1pA input bias current.
7 OUTB output Amplifier B output. Rail-to-rail output, drives 10kΩ loads with ~8mV headroom to either supply rail.
8 +VS power_in Positive power supply, 2.3V to 5.5V (single supply) or split-supply with

Key specifications

Parameter Value
Manufacturer XBLW
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LMV358AMDTR
  • LMV358ADTR
  • LMV358ATDTR

CAD (KiCad official)

  • Symbol: LMV358AMDTR
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lmv358amdtr.step 123 KB You want the bare part, or you mark your own boards.
lmv358amdtr-etched.step 2.1 MB You want the part with LMV358AMDTR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 525 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XBLW datasheet (18 pp, sha256 89ce10171c639b50, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF