LMV324ADTR
Public Unreviewedby Ray
XBLW LMV324ADTR XBLW Operational Amplifier, SOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownLMV324ADTR
XBLW · Operational Amplifier · SOP-14
LMV324ADTR from XBLW, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output. Rail-to-rail output swing capable of driving heavy loads (VOH = VS+ - 8mV, VOL = 8mV with 10kOhm load). |
| 2 | -INA | input | Inverting input of amplifier A. Common-mode voltage range extends from VS- - 0.1V to VS+ + 0.1V (rail-to-rail input). |
| 3 | +INA | input | Non-inverting input of amplifier A. Same rail-to-rail common-mode range as -IN (VS- - 0.1V to VS+ + 0.1V). |
| 4 | +VS | power_in | Positive power supply, 2.3V to 5.5V. Split supplies are allowed provided VS+ to VS- stays within 2.3V-5.5V. Bypass with 0.1uF close to the pin. |
| 5 | +INB | input | Non-inverting input of amplifier B. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V). |
| 6 | -INB | input | Inverting input of amplifier B. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V). |
| 7 | OUTB | output | Amplifier B output. Rail-to-rail output swing; short-circuit source/sink current ~40mA. |
| 8 | OUTC | output | Amplifier C output. Rail-to-rail output swing capable of driving 10kOhm loads to within 8mV of the supply rails. |
| 9 | -INC | input | Inverting input of amplifier C. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V). |
| 10 | +INC | input | Non-inverting input of amplifier C. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V). |
| 11 | -VS | power_in | Negative power supply, normally tied to ground. May be biased below ground provided VS+ to VS- stays within 2.3V-5.5V. Bypass with 0.1uF close to the pin. |
| 12 | +IND | input | Non-inverting input of amplifier D. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V). |
| 13 | -IND | input | Inverting input of amplifier D. Rail-to-rail input range (VS- - 0.1V to VS+ + 0.1V). |
| 14 | OUTD | output | Amplifier D output. Rail-to-rail output swing; short-circuit source/sink current ~40mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | SOP-14 |
| Category | Op-amp/Cmp |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
LMV324ADTRLMV324ADTRATDTR
CAD (KiCad official)
- Symbol:
LMV324ADTR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lmv324adtr.step |
195 KB | You want the bare part, or you mark your own boards. |
lmv324adtr-etched.step |
2.0 MB | You want the part with LMV324ADTR already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 535 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XBLW datasheet (18 pp, sha256
89ce10171c639b50, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).