component
LMT84
Public Unreviewedby Ray
TI analog temperature sensor, SC70-5. -50 to 150 C, -5.5 mV/C output, no calibration. Datasheet-verified.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownLMT84
Texas Instruments · Temperature sensor · SC70-5
Reports temperature as an analog voltage, so an ADC reads it directly with no interface or calibration. The output falls about 5.5 mV per degree C over a -50 to 150 C range, sitting near mid-supply at room temperature, and the low 5.4 uA supply current suits battery designs. Its low output impedance drives an ADC input or a comparator without a buffer. A small, cheap analog thermometer, the SC70 sibling to the classic LM35.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply ground. On the SOT/SC70 (DCK) package pin 1 is a direct connection to the back side of the die and must be tied to GND. |
| 2 | GND | power_in | Power supply ground. On the SOT/SC70 (DCK) package pin 2 is also a direct connection to the back side of the die and must be tied to GND. |
| 3 | OUT | output | Analog output. Outputs a voltage that is inversely proportional to temperature with an average sensor gain of -5.5 mV/°C. Push-pull output with ±50 µA drive capability; short-circuit protected. |
| 4 | VDD | power_in | Positive supply voltage, 1.5 V to 5.5 V. Quiescent current is 5.4 µA typical. Bypass to GND with a small ceramic capacitor close to the pin. |
| 5 | GND | power_in | Power supply ground. Tie to the system ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Type | Analog temperature sensor (voltage output) |
| Range | -50 to 150 C |
| Output slope | -5.5 mV/C |
| Accuracy | +/-0.4 C (typ) |
| Supply current | 5.4 uA (typ) |
| Supply | 1.5-5.5 V |
| Package | SC70-5 |
Ordering variants
Same part, different packaging or reel option.
LMT84DCKR (SC70-5)LMT84LP (TO-92)LMT84LPG (TO-92, bulk)
CAD (KiCad official)
- Symbol:
Sensor_Temperature:LMT84DCK (KiCad official) - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC70-5 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
ad87d637ced4b846, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).