LMC6062IMX
Public Unreviewedby Ray
Texas Instruments Operational Amplifier, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownLMC6062IMX
Texas Instruments · Operational Amplifier · SOIC-8
LMC6062IMX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of op-amp channel A. Rail-to-rail output stage swings within 10mV of supply rails with a 100kΩ load. Output short-circuit current is ±30mA max. |
| 2 | IN-A | input | Inverting input of op-amp channel A. CMOS input with ultra-low input bias current (10fA typical) and >10 TeraΩ input resistance. |
| 3 | IN+A | input | Non-inverting input of op-amp channel A. Input common-mode range includes V- (ground) and extends to (V+ - 1.9V) typical. |
| 4 | V- | power_in | Negative supply rail. For single-supply operation, tie to ground; for split-supply, connect to negative supply. Total supply voltage (V+ - V-) must be between 4.5V and 15.5V (16V absolute max). |
| 5 | IN+B | input | Non-inverting input of op-amp channel B. Input common-mode range includes V- (ground) and extends to (V+ - 1.9V) typical. |
| 6 | IN-B | input | Inverting input of op-amp channel B. CMOS input with ultra-low input bias current (10fA typical) and >10 TeraΩ input resistance. |
| 7 | OUTB | output | Output of op-amp channel B. Rail-to-rail output stage swings within 10mV of supply rails with a 100kΩ load. Output short-circuit current is ±30mA max. |
| 8 | V+ | power_in | Positive supply rail. Operates from 4.5V to 15.5V total supply (V+ - V-). Ultra-low quiescent current of 16µA per amplifier (32µA typical for both amplifiers). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LMC6062IMXLMC6062IMXAIMLMC6062IMXINLMC6062IMXAINLMC6062IMXAMJ
CAD (KiCad official)
- Symbol:
LMC6062IMX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lmc6062imx.step |
122 KB | You want the bare part, or you mark your own boards. |
lmc6062imx-etched.step |
2.0 MB | You want the part with LMC6062IMX already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 505 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
ab3e119e32403e93, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).