Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

LF247DT

STMicroelectronics · FET InputAmplifiers · SOIC-14

LF247DT from STMicroelectronics, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1. Short-circuit protected to either supply. Typical output swing ±12 V into 2 kΩ at ±15 V supplies.
2 IN1- input Inverting input of amplifier 1. High-impedance JFET gate (Ri ≈ 10^12 Ω). Input bias current ~20 pA typ at 25°C.
3 IN1+ input Non-inverting input of amplifier 1. High-impedance JFET gate. Common-mode range +15 V / -12 V (typ) at ±15 V supplies.
4 VCC+ power_in Positive supply rail. Operating range up to ±18 V absolute maximum. Typical operation ±15 V; supply current ~1.4 mA per amplifier.
5 IN2+ input Non-inverting input of amplifier 2. High-impedance JFET gate.
6 IN2- input Inverting input of amplifier 2. High-impedance JFET gate.
7 OUT2 output Output of amplifier 2. Short-circuit protected. Slew rate 16 V/µs typ, gain-bandwidth 4 MHz typ.
8 OUT3 output Output of amplifier 3. Short-circuit protected.
9 IN3- input Inverting input of amplifier 3. High-impedance JFET gate.
10 IN3+ input Non-inverting input of amplifier 3. High-impedance JFET gate.
11 VCC- power_in Negative supply rail. Absolute maximum ±18 V (bipolar) or 36 V total across VCC+/VCC-. Typical operation at ±15 V.
12 IN4+ input Non-inverting input of amplifier 4. High-impedance JFET gate.
13 IN4- input Inverting input of amplifier 4. High-impedance JFET gate.
14 OUT4 output Output of amplifier 4. Short-circuit protected.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • LF247DTD
  • LF247DT
  • LF247DTN

CAD (KiCad official)

  • Symbol: LF247DT
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (10 pp, sha256 2e2081e9c6a90f86, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF